Máy in áo thun MIMAKI CJV30 – 130

Máy in áo thun MIMAKI CJV30 – 130 có công nghệ dẫn đầu trên thế giới, tự động thay đổi từ chế độ in qua cắt, độ chính xác cực cao, cho sản phẩm cắt cực chính xác và sản phẩm in vô cùng sắc nét. Có thể in trên decal cắt bế để ép chuyển nhiệt lên áo thun , đặc biệt in trên nhiều loại vật liệu quảng cáo.

hinh-mimaki-cjv30-130

3 lí do chọn máy in CJV30-130

  1. Một máy hai tác dụng, ứng dụng trong rất nhiều lĩnh vực, giúp khách hàng tiết kiệm tối đa chi phí nhân công và mặt bằng.
  2. Công nghệ dẫn đầu trên thế giới, tự động thay đổi từ chế độ in qua cắt, độ chính xác cực cao, cho sản phẩm cắt cực chính xácsản phẩm in vô cùng sắc nét .
  3. Sử dụng mực in khô nhanh, sau khi in có thể cắt được ngay mà không phải chờ đợi, giúp năng suất máy được khai thác một cách tối đa nhất.

Một máy hai tác dụng, tiết kiệm không gian và chi phí

2222

in áo thun bằng decal chuyển nhiệt

Tham khảo vật liệu in chuyển nhiệt: Decal in chuyển nhiệtmàng in chuyển nhiệt

Print Speed and Cutting Speed (CJV30-160)

High speed for reduced delivery times High speed printing at maximum 17.5m2/h

High speed printing at a maximum speed of 17.5 m²/h (540×720 dpi, 4 colors) and in standard mode at 11.9 m²/h (540×1,080 dpi, 4 colors).
The symmetrical ink cartridge arrangement enables reliable and detailed high quality image generation even with bidirectional printing.


CJV30 Series


CJV30 Series

*The maximum width when printing with CJV30-160

Automatic Media Clamp function

Substantial reduction of manual

The number of pinch rollers and their clamp pressures can be set from RIP software and pinch roller pressures automatically changed according to media. By raising the intermediate pinch rollers on both sides at the time of cutting, media peel-off after cutting is eliminated.
Enables unattended operation without manual intervention from start of printing to finished cutting.
CJV30 automatically adjusts to ensure accurate media feed. This results in high quality finishing of both, print and cut.


CJV30 Series

Comparison to previous model



Continuous unattended operation is made possible

UISS (Uninterrupted Ink Supply System)

When the ink cartridge runs out, another cartridge automatically begins to supply ink.Ink cartridges can be replaced during printing and overnight continuous printing is possible.
*UISS only works in 4 color mode.


CJV30 Series

High quality prints with a maximum resolution of up to 1440 dpi


Generation of vivid and brilliant images

Highest resolution print output at 1,440 dpi with three different dot sizes.
Generation of smooth and beautiful images without graining, even when printing in four color mode.


CJV30 Series

Continuous crop mark detection function


High precision contour cutting


A photo-sensor on the cutting head automatically reads the registration marks on the print to precisely position the cutter automatically. Even with a laminated print, contour cutting is performed with great accuracy.


CJV30 Series

2 types of ink variations


SS21ソルベントインク

SS21 Solvent ink

By using the fast drying SS21 solvent ink, the media can be cut directly after printing.
Of course, the ink will not peel off during the cutting process.


ES3エコソルベントインク

ES3 Eco-Solvent ink

Eco-solvent ink can be used safely in general office environments and does not require special ventilation equipment.


白インク

More vivid full color printing with White ink

Mimaki’s unique “White Ink Overlay Print” enables simultaneous printing of colors and white ink.
When printing on transparent substrates, white ink underprinting enables printing of more vivid images.
* For both SS21 ink and ES3 ink


シルバーインク

Stunning metallic effects with Silver ink

Shining silver color gives your prints a metallic appearance.
In combination with standard full colors,gold and bronze and other metallic effects can be printed.
*For ES3 ink only
*Silver ink is used in 8 color mode only.


Application


From RIP to cutting, Mimaki’s software answers all professional requirements for multiple applications.
In addition, easy to operate software for preparing the print & cut data is included.


RasterLinkPro5 SG

Continuous printing & cutting RasterLinkPro5 SG

Cutting data prepared in Illustrator (FineCut) can be combined with the associated printing data. Afterwards the CJV-30 starts consecutive print and cut operations.
16-bit rendering tone jumps, white overlay printing and among other functions help to produce higher image quality.
The web update function is added to easily achieve both software update and profile download.


FineCut8

Higher cutting accuracy FineCut8 for Illustrator/FineCut8 for CorelDRAW

Highly sophisticated requirements such as contour cutting are enabled. Furthermore tiling/nesting as well as large products can be accommodated.
By incorporating RasterLink, print and cut can be easily operated from FineCut.


Simple Studio

Print & Cut made easy for everyone Simple Studio

No previous experience of Illustrator is required for generation of vivid and creative stickers.
Cut lines for the printed image are automatically generated by using the graphics and photo data. The software includes functions such as gradation settings etc.

Specifications

CJV30-60 CJV30-100 CJV30-130 CJV30-160
Maximum print /
cut width
610 mm (24.0″) 1,020 mm (40.1″) 1,361 mm (53.5″) 1,610 mm (63.3″)
Print resolution 540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink Kind Exclusive solvent ink: SS21 ink, ES3 ink
Capacity 4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media Width 620 mm (24.4″) 1,030 mm (40.5″) 1,371 mm (53.9″) 1,620 mm (63.7″)
Thickness Less than 1.0 mm
Roll weight Less than 25 kg (55 lbs.)
Roll diameter Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1″)
Maximum cutting speed 30 cm: 11.8″/s (42 cm: 1 6.5″/s at the angle of 45)
Cutting force 10-350 g
Applicable tools Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting Cutting in Y direction by cutter on the head
Media heater Pre/print/post heater
Media take-up device Roll take-up device (Standard), inside/outside selectable
Command MRL-III , MGL-IIc2
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power AC100V~240V, Less than 1,380VA
Operation environments 20°C~35°C, 35~65%RH (No condensation)
Dimensions
(W x D x H)
1,524 x 739 x
1,424mm
(60″ x 29.1″ x
56.0″)
1,934 x 739 x
1,424mm
(76.1″ x 29.1″ x
56.0″)
2,289 x 739 x
1,424mm
(90.1″ x 29.1″ x
56.0″)
2,538 x 739 x
1,424mm
(99.9″ x 29.1″ x
56.0″)
Weight 110kg
(242 lbs.)
130kg
(286 lbs.)
145kg
(319 lbs.)
160kg
(352 lbs.)