Direct To Garment Printter Anajet mPower
Direct To Garment Printter Anajet mPower i – mP5/ mP10
AnaJet mPower i-series printers are the fastest and most durable single-platen garment printers on the market. They produce the highest quality images on many types of garments, especially 100% cotton and high-cotton blend t-shirts.
Printing & Maintenance
Printing with an mPower is incredibly easy. Once you have designed or received a completed graphic, open the graphic in AnaRIP to make your ink setting selections. Click “Print” within AnaRIP to send the graphic to your printer.
Load the garment flat onto the printer table, hoop it, and press the green “Print” button. The printer will print the graphic directly on the garment. Carefully remove the freshly printed garment and load it onto your heat press for 60 to 90 seconds (or use your tunnel conveyor dryer per instructions] to heat-cure the ink to the shirt.
► Video Anajet mPower:
The mPower i-series takes up about four square feet in your shop or home and it weighs 180lbs. The printer should always be kept in a comfortable room-temperature environment with at least 45% relative humidity. Use a hygrometer to measure humidity and operate a non-misting, non-condensing humidifier nearby if necessary.
The maximum print size on the mPower is 14” x 18” (35.6cm x 45.7cm).
Optional print tables include a Hat Platen (6” x 1.5”), Youth Size Print Table (8.5” x 12”) and Sleeve Print Table (4” x 17”). The mPower has USB 2.0 and SD memory card slots for “Plug-n-Print” capabilities.